3D Array Camera Inspection Machine

Edac cooperates with German Miiri to develop an area array optical system suitable for on-line inspection of glass flatness/profile/defective appearance; REFLECTCONTROL has a field of view of 160*130mm, using REFLECTCONTROL to detect a single product with CT as short as 0.15s, and the detection accuracy is up to nanoscale.

  • Technical Parameters
  • Technical Specification
High-precision reflectCONTROL 3D area array optical automatic inspection equipment
机台名称 高精度reflectCONTROL 3D面阵光学自动检测设备
Detection object Glass/high-brightness metal parts/plastic parts/touch screen (and glue) and other materials
Test content Flatness, contour, appearance inspection,
Overall dimensions 1500*1800*2200mm manipulator controller (800*650*930)
weight About 1300KGS  
Effective itinerary Mechanical arm length 1400mm
Targeting Fixture positioning
Operation method Manual operation (can be customized according to requirements)
Overall positioning accuracy of the machine 3μm
Measured product size range 500mm(L)*300mm(W) (can be customized according to requirements)
Main parameters of the detection system reflectCONTROL:
1.reflectCONTROL; 2. Z axis accuracy: nm level; 3. Effective measuring range: 75+/-5mm; 4. Measurement area size: 160mmX80mm; 5. Non-contact scanning.
Detection time 2s varies according to the size, material, and point data of the measured product, and the actual time required shall prevail.
Detection repeatability accuracy (static) 5μm
Main configuration a. Marble platform + lower frame + 1 set of 6-axis manipulator + product fixed fixture;
b . 1 set of REFLECTCONTROL detection system;
c . 1 set of computer hardware + 1 set of EDAC synchronous motion acquisition card;
d . EDAC independent research and development of 802 detection software;
e.IT: 1 computer host (EH-7i7) + 2 monitors (VA-229N) + 1 keyboard and mouse set (MK-200)
Use environment a. Temperature: 22℃±2℃;                        
b. Humidity: 55-65%;
c. Vibration: The floor vibration of the installation site, when the vibration is below 10Hz, the amplitude must be below 2μP-P. When the vibration is between 10Hz~50Hz, the acceleration must be below 0.4qal. It is recommended that the installation place is as far away as possible from vibration sources such as press machines or large truck passages to ensure the accuracy of the machine;
d. Power supply:
d1.380V AC, 50HZ/60HZ; (three-phase four-wire: L1+L2+L3+PE) 2. Power: <9000W; 3. The power supply is directly connected to the power supply circuit breaker; 4. The power supply needs to be grounded; (manipulator controller)
d2.220V AC, 50HZ; (single phase: L+N+PE) 2. Power: < 1500W; 3. The power socket is a triangle plug; 4. The power supply needs to be grounded; (machine)
* The detection accuracy that can be achieved due to different materials of products and different surface treatment processes will vary, and the actual measurement results shall prevail.