0769-83101070

Flatness Inspection Machine

The detection system can realize the rapid detection of the flatness of the touch screen of the watch. The detection system collects data synchronously during the detection process. Combined with the 3D software independently developed by EDAC, it can realize the point-to-line function. Its repeatability accuracy can reach 5µ, and the detection time is 0.3 s/pc, the detection efficiency of one set is equivalent to 3 times that of traditional detection instruments, and it is cost-effective

  • Technical Parameters
  • Technical Specification
High-speed and high-precision synchronous acquisition flatness testing equipment
Machine name High-speed and high-precision synchronous acquisition flatness testing equipment
Detection object Glass/high-brightness metal parts/plastic parts/touch screen (and glue) and other materials
Test content Flatness of watch touch screen
Overall dimensions 1000*1000*1830mm
weight 620kg
Effective itinerary X axis 410mm, Y axis 410mm, Z axis 100mm
Targeting Fixture positioning
Operation method Manual manual operation/single station or multi-station automatic detection (can be customized according to requirements)
Overall positioning accuracy of the machine 3μm
Measured product size range 33mm(L)*30mm(W) (can be customized according to requirements)
Main parameters of the detection system Point laser:
1. ILD2300-2DR point laser; 2. Spot size: 23mmX23mm; 3. Effective measuring range: 10+/-1mm; 4. Fastest sampling frequency: 49KHZ; 5. Non-contact scanning.
Detection time 0.3s varies according to the size, material and point data of the measured product, and the actual time required shall prevail.
Detection repeatability accuracy (static) 5um
Main configuration a.
Fangtong welding lower frame + aluminum profile upper frame + marble + XY linear motor module + product fixing fixture b. 1 computer host (EH-4PT) + 1 monitor (VS207) + 1 keyboard and mouse set (MK-200) 
Use environment a. Temperature: 22℃±2℃;
b. Humidity: 55-65%;
c. Vibration: The floor vibration of the installation site, when the vibration is below 10Hz, the amplitude must be below 2μP-P. When the vibration is between 10Hz~50Hz, the acceleration must be below 0.4qal. It is recommended that the installation place be as far away as possible from vibration sources such as press machines or large truck passages to ensure the accuracy of the machine;
d. Power supply:
    1.220V AC, 50HZ; (single phase: L+N+PE) 2. Power: <2000W; 3. The power socket is a triangle plug; 4. The power supply needs to be grounded;
e. Air source (when a vacuum system is required):
    1. Compressed air greater than 6 kg, the air needs to be dried and filtered. There is no model requirement for the model of the dryer and filter, just ensure that the filtration density is less than 1μ;
    2. Ensure stable air pressure;
    3. Ensure that the consumed air flow is greater than 630L/min;
f. Product discharge connection (the following method can be used if necessary Do connection):
OK is connected to the conveyor belt for manual visual inspection, and NG products are directly connected to the distribution box.
* The detection accuracy that can be achieved due to different materials of products and different surface treatment processes will vary, and the actual measurement results shall prevail.