Flatness testing machine

Measured Target:Materials like metal part,plastic part and so on. Machine Overall Positioning Accuracy :3μm Max Speed:500mm/s Measuring Repeatability(Static):5μm Max acceleration:200/ms Machine Overall Size:1000*1000*1700mm

Technical Parameters

Technical Specification

Flatness testing machine
机台名称	环形导轨多功能自动化光学检测设备
Measured Target	Materials like metal part,plastic part and so on.
Inspection Item	Flatness
Machine Overall Size	100010001700mm
Weight	Around 750KGS
Working Range	X Axis 400mm, Y Axis 400mm
Positioning Way	Fixture positioning and software positioning
Operation Way	Manual loading,individual station testing
Size of Measured Target	≦200mm（L)*200mm(W)
Main parameters of detection system	1.Line spectrum confocal 2.Laser spot spacing：0.04mm 3.Laser linewidth：50mm 4.Frequency:200～2000HZ 5.Non-contact scan
Machine Overall Positioning Accuracy	3μm
Max Speed	500mm/s
Max acceleration	200/ms
Cycle Time	Detection time varies depending on the size and material of the measured product and the point data. The actual testing time shall prevail.
Measuring Repeatability(Static)	5μm
Main Configuration	a.Marble platform + upper and lower frame + XY linear module + product fixture b.one set of Micro-Epsilon line laser measuring system c.one set of computer hardware + one set of EDAC synchronous motion acquisition card d.EDAC self-developed 802 inspection software.
Ambient Environment	a. Temperature: 22°C±2°C b.Humidity:55-65% c. Vibration: The floor vibration of the installation site, when the vibration is below 10Hz, the amplitude must be below 2μP-P. When the vibration is between 10Hz~50Hz, the acceleration must be below 0.4qal. It is recommended that the installation place is as far away as possible from vibration sources such as press machines or large truck passages to ensure the accuracy of the machine; d.Power supply: 1.220V AC, 50HZ; 2. Power: <2000W ; 3. The power socket is a triangle plug; 4. The power supply needs to be grounded; e.Manually loading and unloading of materials
＊　As different materials &surface processing could affect the accuracy that can be achieved, and the practical accuracy is decided by the final measuring result.